Toys & Models Henry Room

Australian 'mite' tether car, 2.5cc TMP diesel engine with replacement 'curly carb' Fuel system and 'sneaker' fuel cut off fitted. Raylite replica...

Swedish spur drive 10cc tether car, cast aluminium pan and body. McCoy 60 Serial #22320, No fuel or ignition system. New Swedish tyres, Length 41c...

Unknown make, 2.5cc twinshaft tether car, possibly home built with hand formed aluminium body. Russian TMP engine. Spring steel front axle. Fuel s...

2.5cc Spur drive tether car with hand formed aluminium pan and body. OS Max glow motor on unusual 1950s spur mount. 'Sneaker' fuel cut-off fitted....

Roy Cox Thimbledrome 'mite' tether car. Cameron 09 engine. Repainted and new tyres fitted, Length 25cm Condition, complete with exhaust, grill and...

Replica Oliver Mercedes from reproduction castings. Replica Oliver Tiger 2.5cc twinshaft diesel engine. Reproduction Raylite tyres all round. Fuel...

Replica ZN 5cc spur drive Tether car, fitted with Dooling 29 engine, Built from a set of John Goodall hand-beaten pan and body sets. Bernhardt rea...

Replica Oliver Maserati Tether Car from reproduction castings. Replica ETI 2.5cc twinshaft diesel, no venturi or NVA. Fuel tank and 'sneaker' fuel...

Superb Replica of an Ian Moore Tether Car, #12 from an original cast pan. Dooling 61 spark ignition engine serial #0044. All fuel and ignition sys...

Replica Oliver Ferrari Tether Car from reproduction castings. Replica ETI 2.5cc twinshaft diesel. 'Sneaker' fuel cut off fitted. Reproduction Rayl...

Superb untouched and unrestored 10cc 'Bobtail' Tether car as run by Ed Rogers in the 1950s, Dooling 61 motor, serial # 6020B. Spark ignition with ...

Original late 1940s magnesium bodied tether car, Dooling F type. Front knuckle suspension, wheels, axles and running gear are all original Dooling...

Replica Oliver Alfa Romeo from reproduction castings. Replica Oliver Tiger 2.5cc twinshaft diesel. Fuel system complete with 'sneaker' cut off, 'c...

Rebuilt 10cc tethercar, origins of cast pan unknown. 10cc Hornet spark ignition engine Serial # V2930, 4” ZN pneumatic rear wheels and tyres, gene...

All cast aluminium 'bomb' style car with a very rare 1.5cc twinshaft diesel by Bill Bannister. Replica Raylite tyres and Bannister replica fronts....

Cameron Precision Rodzy hot rod tether car, Cameron glow engine, Length 20cm

Contemporary replica of 10cc Rowell Rapier Tether Car. Rowell 10cc MkII Series 2 glow ignition motor. As new Rowell rear tyres, generic knife edge...

Eastern European 'schools car'. Tens of thousands supplied to schools, youth groups and training establishments as kits to introduce young people ...

Exceedingly rare Hungarian 2.5cc tether car based on a cast pan and top. 2.5cc Moki twinshaft diesel, rare in itself being converted from an aero ...

Hand built 10cc spur drive teardrop tether car, aluminium pan and top. Spur mount with running gear but no engine. Fuel tank and wheel nut driver ...

Hungarian car based on cast aluminium pan and top with rare factory built 1.5cc twinshaft diesel converted from an aero engine. New Hungarian tyre...

Hungarian late 50s early 60s, 5cc tether race car by Gabor Dobrocsi. Russian copy of SuperTigre side exhaust motor. Fitted with Moki Tyres, the ge...

Ivan Prior 1990s replica of an Ian Moore Shadow Tether Car, 2.5cc CS Oliver Tiger diesel replica. Hand-carved wooden body finished in yellow cellu...

1950s Dooling Arrow 'Bobtail' Tether Car with 10cc Dooling 61 engine, #4851 set up for glow ignition. Believed to be an ex-Edmonton Club car. New ...

Very rare limited edition from 2000 pieces of an Ambrosi Gattafoni Maserati tether car. Modelled on the 1957/58 250F this car has a cast aluminium...

M&E Models of Exmouth 'Special' Tether car, Chassis Numbered 1207, dating to 1947/48. Comprising Chassis, gearbox, axles, suspension wheels and ty...

McCoy Hot Rod Tether Carm McCoy 60 black case spark ignition motor Serial # 8955. Ignition system complete with cell pack. Duromatic wheels and ty...

Modern build based on 1066 MRC design. Reproduction gearbox. 1066 Falcon 5cc spark ignition motor. Original 1066 wheels and tyres with original 10...

Modern build of 1066 Conquest tether car using original 1066 body pressings. 1066 spark ignition Conqueror 10cc spark ignition engine on original ...

Modern build of 1950s 10cc tether car based on a used Ian Moore #12 chassis pan. Reproduction Dooling 61. Fuel and ignition cut-off fitted, but no...

Modern build of Capt Stubbs' 1940s Austin 750 design tether car with McCoy 60 motor. Motor has slotted mounting holes. Dooling front wheels and ty...

Modern replica of a 5cc 'Terry Special' Tether Car. Correct GRP pan and body with aluminium reinforcement. Spur Drive with McCoy 29 glow ignition ...

New build replica of 1950s ZN 5cc Spur drive tether car, based on a set of John Goodall replica drawings, hand beaten pan and body sets. Hand-buil...

Original Fairabend style 'Bobtail' Dooling Arrow Tether Car, Dooling 61 motor, possibly reproduction, no serial number. C&R Tyres on original Dool...

Original McCoy Invader MkII Rail Tether car, approx 1949/50 converted to tether configuration. McCoy 61 spark ignition motor. All original fuel an...

Original McCoy style 'Teardrop' tether car, late 1940s. Spark ignition blue head McCoy 60 on spur mount with gears. ZN pneumatic front and ZN knif...

Original Oliver Tiger Two-Five series 2 Tether Car, 2.5cc Oliver twinshaft diesel engine restored by John Oliver in 2007, accompanying letter from...

Original, British 5cc 'Bobtail' tether car with ETA 29 Mk IV motor, Serial # 429592, GRP body. 'Grenwyn' rear tyres, MM knife edged fronts. Length...

As raced and untouched 10cc tethered race car, Fairabend or 1234 style Dooling Arrow. Dooling 61 motor, serial # 5392B, magneto ignition with Dean...

Wilesco D409 Showmans Engine, Live Steam, finished in red and black with corrugated canopy to read "The Thursford Collection, Norfolk", housed in ...

A Wilesco D-141 Work Station (Workshop), comprising boiler with tablet burner, lineshaft driving bench saw, grinder, reciprocating saw and pillar ...

Mamod SR1A steam roller traction engine with fuel burner, a loose example, worn with corrosion present

Two miniature stationary steam engines to include a Mamod Horizontal boiler engine, with chimney and burner, and a Signaling Equipment LTD model J...

Two Mamod TE1A traction engines, of the usual specification, to include one with bunker, and burner, and drivechain, one missing the bunker and bu...

Three Mamod items to include a SW1 steam wagon, in blue, missing the burner, and drivebelt, used example, would benefit from a clean, the body is ...

Mamod TE1A traction engine, in green, with a black bunker, lightly used example, housed in the original box, missing the roof, with burner, steeri...

Mamod TE1 traction engine, in green, with a white roof, of the usual specification, unboxed example, missing the bunker, loose roof, burner presen...

Mamod SA1 steam roadster, comprising a white and red body, housed in the original box with wear to the model and the box

Mammod kit built SL2 loco, in black, mostly complete, some components, such as the dome, are loose, and are housed in resealable bags. The loco ha...

Hot air steam engine, believed to be commercially made, comprising a galvanized steel base, turned aluminium cylinder head, hot air heat exchange,...

A collection of 1" scale traction engine parts from Henry Greenly designs, loosely based on a Davey Paxman agricultural engine. The wheels, motion...

5-inch gauge life steam chassis for a 2 cylinder 4-4-0 Hudson loco, fitted with cowcatcher, lubricaing gear, rigded chassis, and ridged bogie, tog...

5 inch gauge 0-6-0 tank loco, in MR lined green livery, no.345, fitted with a hand water pump, a whistle, a mechanical lubriator, a fully sprung c...

2.5 inch gauge A3 in LNER lined apple green, no.4472, "Flying Scotsman", coal-fired example, fitted with a fully sprung main chassis, free floatin...

3.5 inch gauge Hornby live steam Stephenson's rocket, of the usual specification, housed in the original box, well-used example, together with a b...

Stephenson’s Rocket live steam items: Loco & tender in original box with track & accessories, has been steamed but looks only once; G103 pair of p...

Two Hornby 3½" gauge Stephensons Rocket coaches in Liverpool to Manchester yellow & black livery, one housed in the original box missing the stick...

Two original 1958-1980s BR Mk1 coach moquette cushions, both in good condition.

Selling station (Kent) framed trackplan, after the addition of the footbridge, measuring 25" by 8", with a fold in the centre.

Reproduction wooden 1:1 scale King Arthur Class nameplate, "Sir Lamiel", painted gold and black, to imitate the original brass plate.