Engineered Live Steam Models, Railwayana & Collectable Toys Auction

Two Mamod Steam Railways Items, a Brake Van, plus Open Ore Wagon - Plus twenty eight sections of Mamod (M.S.S) track, sixteen curves and twelve st...

A Mamod TEIA Steam Traction Engine, excellent unboxed condition, complete with burner and steering rod, appears test fired only, plus a Mamod TEIA...

A Marklin Ref 4095/5 Circa 1930's Live Steam Horizontal Steam Plant, boiler 140 x 50mm with sight glass, whistle, etc, connected to a single pisto...

A Marklin Pre War Horizontal Steam Plant, 5 inch long boiler with sight class, whistle and safety valve, connected to a mid sized plant of ½ inch ...

A Circa 1940 Bassett Lowke 4-6-0 Live Steam "Super Enterprise" and Tender, finished in black, running number 2495, signs of only light steaming, c...

A Pre War Horizontal Steam Plant, boiler diameter 4.5cm; flywheel 6cm, 1.5cm stroke, mounted on a metal base 32 x 12cm incorporation "A" generator...

A Marklin Pre-War Vertical Steam Engine, boiler diameter 5.5cm; flywheel diameter 6cm, missing burner, stack plus other small parts, dirty condit...

A Jetcraft Derwent Model Boat, has been used, boxed with instruction.

Three "Live Steam Plant" Boxed Accessories, Wilesco Ref M74 "Shears Grinder", good condition - Multrim "Power Saw" and a "Line Shaft", for use wit...

Small Live Steam Plant, - playworn with burner.

Mamod TEI "Live Steam" Traction Engine - very good plus unsteamed condition, unboxed, missing steering rod and instructions.

Two Wilesco Live Steam Unboxed Operated "Craftsman" Models, a M73 Wood Cutter, very good - plus M75 Press Operator, poor.

A Wilesco Ref D52 Marine Live Steam Engine, mirror polished boiler 45mm diameter, length 105mm connected to a vertical cylinder operating a 7cm fl...

A Quantity of Model Makers Ephemera Both Soft and Hard Back, covering steam model boat and aeroplane etc, a small amount of "ABC" British Railway ...

An Early Engineered Model Aeroplane Diesel Engine, finished in brass/bright metal; fitted with 12" nylon prop and mounted on a wood base.

A "O.S Max" 2.49cc Ref 15FP Glow Plug Engine, unused in original box with instructions.

An Excellent Example of an Engineered Scale Model 4 Stroke Petrol Air Cooled Engine, with 2¾" flywheel (possibly based on The "Water Witch") fitte...

An Engineered Excellent Example of a Scale Model Internal Combustion Engine, possibly to plans of the NE15 by Malcolm Stride, overhead camshaft op...

A Excellent Engineered Scale Model of a Horizontal Internal Combustion Diesel Engine, powering a 3½" diameter flywheel, single cylinder, 1½" strok...

A Single Piston Engineered Scale Model of a L.A.G Stirling Thermo Acoustic Engine, 8" pyrex tube with stainless steel mesh, 1" stroke piston conne...

An Engineered L.A.G Stirling Thermo Acoustic Engine, twin "Pyrex" tubes with stainless steel mesh, twin 1" stroke pistons connected to a 4" spoked...

An Engineered Scale Model of an Early Steam Turbine, turbine body 6 x 9cm, outside brass flywheel 5.5cm - brass bright metal and red finish, mount...

An Engineered "Elbow" Engine, based on a mechanism known as a Hobsons Joint - powered by either steam or air, connected to a 4½" spoked brass flyw...

An Engineered Small Scale Model of a Gamma "Stirling" Hot Air Engine, fitted with brass burner, glass tube with power piston, displacer piston con...

An Engineered Scale Model of a Stirling "Flame Eater", also know as a "Gulper" or vacuum engine. single cylinder 2" stroke, twin 3½" flywheels, fi...

An Engineered Small Scale Model of a Gamma "Stirling" Hot Air Engine, fitted with brass burner, glass tube with power piston, ½" stroke displacer ...

An Excellent Engineered Model of a Stirling Type "Flame Eater", also known as a "Gulper" or vacuum engine. Twin cylinders with 2" stroke, connecte...

A Small Scale Engineered Model of a Stirling Type Engine, temperature difference hot air engine - built to an excellent standard in brass, steel a...

An Engineered Small Scale Model of a Stirling "Flame Eater", also known as a "Gulper" or vacuum engine, single cylinder of 1" stroke connected to ...

An Excellent Engineered Scale Model of a "Hit and Miss" Water Cooled Petrol Engine, similar to Little Brother/Galloway examples, single cylinder o...

A 1" Scale Model of a Circa 1840 ME Beam Engine, built by a Mr P.J Pickwick in 1967 from plans by G Gentry - powered by either steam or air to a 3...

A Stuart 10H Horizontal Steam Engine, ¾ inch bore and stroke connected to a 3 inch flywheel, fitted with an electric motor and mounted on a 13 x 8...

An Engineered Horizontal Steam Engine- one inch bore by ¾ inch stroke, five inch flywheel, mounted to a wood base- finished in bright metal, red a...

A Centre Flue Marine Boiler, boiler diameter 2½" by 6" long, features water gauge, safety valve, pressure gauge etc. Mahogany wood lagging with br...

A Cheddar Models Puffin Live Steam Plant, horizontal boiler with mahogany lagging, brass bound: attached to a small twin cylinder motor, excellent...

A Diorama of a Late 1930's/40's Power House, displaying an horizontal steam engine, powering a generator via a 7½ inch flywheel, overhead crane, c...

A No 504 Stuart Stationary Boiler, 3½ inch diameter x 10 inch copper drum, cast iron front and back plates, side panels with heat resistant lining...

A Copper Live Steam Boiler, dimension 7½ inch long by 4 inch diameter, with slight glass and fabricated brick effect base and chimney, powering a ...

A One Inch Scale ME Beam Engine Built, to a very good standard from drawings/plans by G.Gentry- Bore 1¾ inch - stroke, 3 inch, 9 inch diameter fly...

A Stuart Turner Model Beam Engine, central column supporting the beam with parallel motion via a single cylinder with outside steam valve; electri...

A Small Quantity of Cast Metal Model "Live Steam" Locomotive Parts, two cylinders, buffers, wheels etc, unused condition.

A Quantity of What Appears to be Brass Components and Plans for a 3½ Inch Gauge Jubilee Class Steam Locomotive - Boiler, Smoke Box, etc. Plus a sm...

A Quantity of Live Steam Components from a Model Makers Workshop, comprising a 36" chassis (possibly 5" gauge). A large copper boiler, cast drivin...

A 5" Gauge Live Steam 0-6-0 Tank Locomotive, twin outside cylinders, Stephenson valve gear, fitted brakes, steps etc, missing backhead controls, ...

A 3½ Inch Gauge Model of a 4-2-2 Stirling Single Great Northern Railway Live Steam Locomotive and Six Wheel Tender, built to a very good standard,...

A Five Inch Gauge Live Steam Model of The French 0-6-0 ''Bourbonnais'' Type Steam Locomotive and Four Wheel Tender- Silver soldered boiler, with p...

A Well Engineered Five Inch Gauge Live Steam Model of a 0-6-0 French Decauville 8T (Mallet) Pannier Tank Coal fired Locomotive- silver soldered bo...

A Well Engineered Model of a 5 Inch Gauge 0-6-0 Side Tank Steam Locomotive, numbered 1019 and named "Alison" - the silver boiler with fittings inc...

A 5" Gauge Live Steam Model of the 2-4-0 Beyer Peacock Tank Steam Locomotive Supplied to The Isle of Man Railway; possibly built from plans/castin...

A Five Inch Gauge Live Steam Example of an 0-4-0 Saddle Tank Steam Locomotive, similar to the Maxitrak Quarry Hunslet "Alice" - silver soldered co...

Six 5" Gauge Wood Construction Passenger "Sit On" Items of Rolling Stock for The "Little Bedstead Iron Railway", numbered one through to seven (no...

A Well Engineered Five Inch Gauge "Blackgates Engineering" Live Steam Freelance Tank Systems 0-6-0 Locomotive "Super Simplex", designed by Martin ...

A One Inch Scale Live Steam Model of a Fowler Type Showmans Engine - missing heat/burner components and other small parts - fitted with generator,...

A Very Good Engineered 1½ Inch Scale Live Steam ''Allchin'' Traction Engine, built to the W.J. Hughes drawings/design for ''Royal Chester''. The m...

An 1½" Scale Live Steam "Allchin" Traction Engine, to the W.J Hughes drawings/design for "Royal Chester" (currently in preservation). The model is...

A Two Inch Scale Clayton Undertype Live Steam Wagon, silver soldered vertical boiler with sight glass, pressure gauge, etc, hand feed pump to cab,...

A 1/5th Scale Clayton Overtype Live Steam Wagon, Built From a "Pride of Penryn" Kit, by Wilson Model Technology of Daventry. Silver solder copper ...

A 'G' Gauge Eight Wheel American Slopeback Tender, with sound by Aristocraft Trains, boxed.

Twenty Bachmann G Scale Figures, in sealed poly packets, lot includes Ref 92316. fireman with shovel, very good.

An Occre (Spanish) 1:24 Scale Wood/Metal Kit Built Model of The "Adler" 2-2-2 Steam Locomotive and Four Wheel Tender, built to a good unpowered/st...